Drywall calculator
Enter your room size to see how many drywall sheets to buy, plus the compound, tape and screws to finish them.
| Item | Amount | Est. cost |
|---|---|---|
| 4×8 ft sheets (1/2 in) | 19 sheets | $228–$342 |
| Joint compound (4.5 gal bucket) | 2 buckets | $34–$50 |
| Paper tape (500 ft roll) | 1 roll | $6–$10 |
| Drywall screws | 4 lb | $24–$40 |
Use 1/2 in board on walls, and 5/8 in on ceilings with framing 24 in apart or where code requires fire-rated board.
Drywall for common rooms
Walls and ceiling, 8 ft walls, 4×8 sheets, 10% waste.
| Room (ft) | Area | Sheets | Total cost |
|---|---|---|---|
| 10×10 | 420 sq ft | 15 | $238–$360 |
| 12×12 | 528 sq ft | 19 | $292–$442 |
| 12×16 | 640 sq ft | 22 | $328–$496 |
| 16×20 | 896 sq ft | 31 | $459–$693 |
Drywall for common room sizes
Frequently asked questions
How many sheets of drywall do I need for a room?
Add the wall area (perimeter × height) and the ceiling area, add 10% for waste, and divide by the sheet size: 32 sq ft for a 4×8 sheet, 48 sq ft for a 4×12.
Should I use 4×8 or 4×12 sheets?
4×12 sheets mean fewer seams to tape, so finishing goes faster, but they are heavy and need two people. 4×8 sheets are easier to carry and fit in most vehicles.
How much joint compound do I need?
Roughly 1 gallon of ready-mixed compound per 100 sq ft of drywall for taping and two finish coats, so a 4.5-gallon bucket covers about 450 sq ft.
How many screws per sheet of drywall?
About 1 screw per sq ft, or roughly 32 per 4×8 sheet with framing 16 inches apart.